%
% message count bias only set once for message cycle in counts
%
_Mach.Mode
">>>" log)(
<
|Init
%
% start message lapse timer and a message counter
%
 *machxaca

|Passify
 *machxadc

|Reinit
%
% restart the device
%
 *machxacb

|Starting
%
% wait for two messages to be received to determine if
% is in Initial mode
%
 *machxacc

|Config
%
% see if device is in Configed mode
%
 *machxace

|Save
%
% save new configuration to flash memory
%
 *machxade

|Partner
%
% initiate linkup to partnered PIC32 device
%
 *machxacx

|Configed
%
% the device has reset and configured, check for partner ip change
%
 *machxacy

|Server
%
% the device has reset and configured, check for partner ip change
%
 *machxacz

|Upload
%
% see if device is in Fill mode
%
 *machxacf

|Uploading
%
% in the process of uploading blocks
%
 *machxacg

|UpFinish
 *machxach

|Uploaded
%
% blocks have been uploaded
%
 *machxadh

|Siphon
%
% siphon to the machine through device
% if Filled
%
 *machxaci

|Siphoning
%
% see if device is in Siphoning mode
%
 *machxacj

|Siphoner
%
% wait for Siphoning to end
%
 *machxack

|Siphoned
%
% the information has been delivered to the machine fully
%
 *machxacw

|Pump
%
% preliminary action to prepare for machine download
% will switch to draining when operator initiates
%
 *machxacm

|Pumping
%
% wait for drain to come into play as a result of operator start
%
 *machxacu

|Drain
%
% set up the serial reception task within the device
%
 *machdrni

|Draining
%
% the serial reception from the machine is starting
%
 *machxaco

|Drainer
%
% main process of drain
%
 *machxacn

|Drained
%
% all the data from the machine program is received
%
 *machxacp

|Pull
%
% start the pull of information from the device
%

|Pulling
%
% information is now starting to be received by the server
%
 *machxacr

|Puller
%
% main pull process
%
 *machxacs

|Pulled
%
% all info from drain of machine has arrived
%
 *machxacv

|Listen
%
% start to listen for machine reporting
%
 *machlstn

|Unlisten
%
% un-listen for serial output data from machine
%
 *machlstx

|Listening
%
% listen for serial output data from machine
%
 *machlstr

|Service
%
% wait to switch to service mode
%
 *machxads

|Engaging
%
% extra slot
%

>
"<<<" &_Msg.Status log)(
pop