=_='Location|Initial|https%3A//phosend.com/Tell%3Fcommand%3Dpullrnh%26outer%3DTessages%26spec%3D55706C5F3F3F3F3F3F3F3F3F3F3F3F3F4A2E747874%26locn%3D/results/5557654321/5025095361/%26count%3D5%26latest%3DUpl_504219233000%26stamp%3D1766523232884' 'Tessages' Url.Accept


Copy the master Install into c:\Install

Copy the totalcmd directory (Wincmd) to C:

Install RemotePC

Install NodeJs complete install.

Install Office.

Configure Notepad with Courier New Bold 16.

Configure Wincmd with same for file list
Save configuration
position and size to about 80% of screen, centered
Save position

Copy a Thumber and Builder VM

Assign network drives M(names drive), P(controller), and T(specialty)

--->DEV, good for installing run-times and Asp.Net stuff --
Install Visual Studio 22

copy these directories to C:
no longer need ___Final (converting minimal uses to Bin)
___Fire
___Gire
___Hire
inetpub\wwroot

If you are overwriting the ___Fire directory, rename the Robot subdirectory
out of the way before copying

Create ___Work directory on C:
Create Incoming\VenB20 directory on C:
Create Tga directory on C:

Map Z: to c:\Incoming

Set permissions on C:\ to allow full control to Users and to IUSR,

close all apps and stop the server while doing this

Usually WinCmd, Excel, Outlook, and Word are pinned to the taskbar

Copy contents of wwwrootBlank over C:\inetpub\wwwroot

Copy Ember, Ax15A, and NoPho, Telnyx Startup, Telnyx Startup 2 shortcuts to the desktop

Edit hosts file for direct local routes for domain resolution (127.0.0.1)
if another computer 'inside' needs to resolve the domains use (192.168.254.xxx)
this is the local ip of the hosting machine
copy the altered hosts file to:
c:\Windows\System32\drivers\etc\

ZeroSsl, log in, click New Certificate,
Domains --> turn Need a Wildcard Cert to On, next step
Validity --> set 90-day, next step
CSR --> leave as auto-generate, next step
Encryption --> leave as RSA2048, next step
Finalize order --> insure 'You are fine staying ...', next step
Verify --> use DNS setting
open GoDaddy and go to the domain settings, click DNS tab
add Cname record, copy the 'name' entry of zerossl (without the .xxx at the end)
paste that in the Cnames name, copy the entire 'value' from zerossl entry,
paste that in the Cname Value, add that entry
continue with verify, when the verify is successful, use the Download to get the zip
of the certificate files
create a named folder in ___Work for the files in the zip
start a cmd in that directory, use the appropriate line from aaaaaopenssl.txt
such as: openssl pkcs12 -export -out textmylogos.com.pfx -inkey private.key -in certificate.crt
enter the password when prompted as: shop1875, and repeat for verify password
in that same directory, double-click the certificate .crt, details tab, copy-to-file
choose the base64 (cer) option, should finish successfully
now the domain cert directory has the files necessary to add to Server Certificates

Start IIS, click on the Server parent node on the left, open Server Certificates
delete any cert version of that domain in the list

Import a cert, browse to the cert directory, should be one pfx file to choose
use domain name as friendly name, must be set to Web Hosting
the domain will appear in the list
'complete certificate request' browsing to the one cer that will show,
use the friendly name again, and must be Web Hosting.
the cert will be available for assignment to Bindings for the Site
click on the Default Website, click 'Bindings' Add a binding, set for https
enter the raw domain (textmylogos.com example), make sure name auth required checkbox is clicked
pick the server cert from the dropdown, and finish
do another add binding, with www.textmylogos.com and same other settings

for the same Default Website Add applications:
click new application then:
Tell for the app name, browse to ___Fire\Tell\Tell for the location
Npart for the app name, browse to ___Fire\Npart\Npart.Server
Portal for the app name, browse to ___Fire\mojoportal\Web
Fuq for the app name, browse to ___Fire\Fuq\src\Web
Chat for the app name, browse to ___Fire\Fur\Chatting

Add a virtual directory Miosk pointing to c:\inetpub\images\kiosk

start vmware and load:
___AAvm01_Builder vm
___AAvm02_Thumber vm
make sure the shared folders are set, M, P, T drives
start the snapshot for each, indicate you copied it if asked

make sure there is no ___Conduit directory on C, rename if necessary

install Phosend ver 3.042
don't launch at installation finish

copy the seed setup for a global phosend to C:, overlays ___Conduit
choose one of the 555 numbers, new or migrated

set c:\___Conduit with write and full control for permissions of users (USERS_) of server

Install Adobe CC suite
start with creative cloud, then Photoshop
--->DEV install Dreamweaver, Bridge can also install
Illustrator, Premiere, Acrobat

when photoshop start, cancel any popups, hide suggestions
edit-Prefs:
General - unclick auto-show home screen
File Handling - set maximize compatibility to Never
Performance - history states should be 20
Plugins - click on Remote Connections, change password to phosend
press OK, close photoshop and reopen
pin Photoshop to the taskbar
start photoshop, Windows - Action
drag Actions to the join channels, layers, and paths tab group
close the history and comments tab group
close the Color tab group
drag Properties where you dragged actions
close the adjustments tab group
unmax photoshop and float in the middle of screen using 90% area

determine the local ip for this computer, 192.168.254.xxx
in the router at 192.168.254.254
advanced setting/port forwarding
delete previous mapping
1-65535 for Wan and Lan port range
Tcp/Udp
set for this machine as client ip

under windows security Firewall and network -- allow an app
add an app, c:\___Fire\Ngrok\Ngrok.exe

right-click This PC in explorer, under properties - Advanced System Settings
Environment Variables and under System vars edit Path
add c:\___Fire\Ngrok and save

add the authtoken for Aamg ----
 ngrok config add-authtoken 35CYvQYMY53C1BxbcjJORhg98lS_4CSkCrEePzGFREY1dzunn

open the Telnyx.com site, log in with
user iot@aamediwaweb.com
pass Dlc4067!2194

start the Telnyx Startup shortcut, Ngrok should start

navigate to Real-Time Communications/Messaging/Programmable Messaging
edit the TextMyPhotos messaging profile
from the Ngrok screen, copy the url to be used by telnyx
example - https://uncausative-lashaun-unrectified.ngrok-free.dev
under Inbound tab change the Webhook url to the one from Ngrok screen
remember the /webhook after the url
save the changes

start the Telnyx Startup 2 shortcut, should start server on 8080

test that primary domain is available (goes through hosts file)

--->allows vectoring to resident FireDance installation

copy conduit.txt to c:\___Conduit\Installed and c:\___Conduit

Start photoshop
Start phosend
When started click Excel button

file uploads are collected here:
c:\___Fire\Fuq\src\Web\uploads\


Excel settings ---------
To enable the Excel Developer menu, go to File > Options > Customize Ribbon,
 and then check the box next to "Developer" on the right-hand side before clicking OK. 

go to File > Options, start with General
 Office Background - Circles and Stripes
 Office Theme - Use system setting
 Click Privacy Settings
  make sure any optional experiences are enabled, click ok
 Advanced
  unclick 'include fonts that are stored on the printer'
 Quick Access Toolbar
  add Copy Cut Paste and Paste Special
 Trust Center
  Click Trust Center Settings
   Trusted Locations
    Check the Allow trusted on network
   ActiveX settings
    Click Enable all controls
    Unclick Safe mode
   Macro Settings
    Click Enable VBA Macros
    Click Enable Excel 4.0 macros
    Click Trust Access to the VBA project model
   Protected View
    Unclick all, Click Enable prot view for files from Internet
   External Content
    Click Enable all Data Connections
    Click Enable all Linked Data Types
   File Block Settings
    Unclick all boxes, click Excel 95 Workbooks Save checkbox
    Click Open selected in Protected View allow editing
   Protocol settings
    Click allow apps to use ftp and http
  Click OK
 Close Excel

Outlook Settings ----------
 If Outlook won't open due to .ost (not connected to Exchange Server)
---
Option 1: Re-establish the Exchange connection
Close Outlook and any related processes.
Go to Control Panel > Mail > Email Accounts.
(can be Accounts -> Email & accounts under global Settings)
Select your Exchange account and click Change.
Ensure your account settings are correct and that your password is saved.
If the problem persists, delete the .ost file and let Outlook create a new one by re-syncing
 from the server. The file is typically located in C:\Users\Username\AppData\Local\Microsoft\Outlook. 

registry edit
 HKEY_CURRENT_USER/Software/Microsoft/Office/(version number)/Common/Identify
 On the right click New/DWORD Name is EnableADAL, set to 0
 click New/DWORD Name is EnableADALaptopWAMOverride, set to 1
Restart computer
 
---

Wordpress - manually installing Wordpress (.org)
https://www.youtube.com/watch?v=puNkk4WSfYE

 1:48 start server manager
 1:56 local server ie enhanced to off
 2:28 download MySql Community Server complete msi
      start installer, select Custom Settings
      add mysql server, mysql workbench
 3:39 configure type and networking, use default
      authentication method, use default
      accounts and roles, use Northpoint25! for root password
       confirm same password
       windows service, use default
       server file permissions, use default
       apply configuration, finish
 4:19 configure workbench
       use the Northpoint25! set for the root password
       when starts normally, proves the installation success
 4:33 launch sql server command line
       create database wordpress;
       use wordpress;
       create user 'wpuser'@'%' identified by 'Northpoint25!';
       grant all on wordpress.* to 'wpuser'@'%';
       flush privileges;
       exit
 6:06 download php for windows x64 non thread-safe
      download vc_64x_redist, (not if vs already installed)
 7:18 start php installer, change extraction point to c:\PHP
 7:58 add c:\PHP to path in system environment variables
 8:35 in c:\PHP copy php-production.ini to php.ini, edit
       cgi.force_redirect = 0
       cgi.fix_pathinfo = 1
       fastcgi.impersonate = 1
       fastcgi.logging = 0
       extension=mysqli
       extension=pdo_mysql
       save
11:06 test php configuration, open regular command line
       php -m to list and check extensions
11:40 install IIS if not installed (thru server manager)
12:12 add roles and features, step to features
       add .net framework, also set sub-feature Asp.Net checkbox
       health and diagnostics, http logging, custom logging, logging tools
       should be checked
       make sure iis mgmt console and iis 6 compat are checked
       also IIS mgmt scripts
       app dev asp.net current version checked
       cgi, isapi Extensions, isapi Filters, should be checked
       click install
14:06 open computer mgmt console, click Local Users and Groups/Users
       create user wordpress_svc, set password to Northpoint25! and confirm
       password never expires, create
14:53 open properties of the wordpress_svc user, add administrator to member of
       click ok
15:55 make sure server mgr finished installing stuff
       start iis, download microsoft IIS url rewrite installer x64
       click on server name, Handler Mappings, add Fastcgi --
        request path - *.php
        module - FastCgiModule
set the file open to exe, not dll
        executable - browse for c:\PHP\php-cgi.exe
        name - PhpViaFASTCgi
        click request restrictions, file or folder checked
       click ok
18:18 add to default docs server level - index.php at top
18:42 fastcgi settings in server level, edit the php-cgi line
       environment vars collection, add PHP_FCGI_MAX_REQUESTS
       value 10000, save that
19:42 application pools, add app pool Wordpress, with default settings
       set app pool defaults, app pool defaults, custom user
       in computer mgmt, users and groups/users/wordpress_svc,
       right click, copy, click set credentials of app pool,
       should be MACHNAME\wordpress_svc
       paste into user name, password Northpoint25! and confirm, ok
21:13 check that all works, click on Default Web Site, basic settings
       click test connection, both should pass, should have proper
       permissions already set previously, hit ok
21:31 download wordpress from wordpress.org, extract to
       c:\inetpub\wwwroot\wordpress
22:39 in wp directory copy wp-config-sample.php to wp-config.php
       edit, change DB_NAME value to wordpress, DB_USER value to wpuser
       DB_PASSWORD value to Northpoint25!, DB_HOST value to phosend.com
23:45 navigate to phosend.com/wordpress/wp-admin/install.php
       site title - Wordpress for PhoSend, user name - WpAdmin (for wp login)
       password Northpoint25! and confirm, info@phosend.com for email
       click install wordpress, should show success, log in WpAdmin and Northpoint25!
       should be in wordpress/wp-admin now

Cleaning out ___Conduit inetpub\wwwroot\Work inetpub\wwwroot\Results
------___Conduit
.\Bin\Tree\Timed - delete all directories, they are two digits each
.\Results - delete all files

------Work
.\Current - delete all files
.\Subject - delete *_tack.*
.\Twid - delete all files
.\Twix - delete all files